Features
The Heathers Kit is composed by:
BackPlate Heater for Phase Change Systems
The BackPlate Heater helps the prevention of moisture under the MotherBoard, the ideal use is at direct contact with the motherboard (the heater have adhesive film), followed by a neoprene foam layer of at least 5mm pressed by the metal or plastic backplate.
This Heater is able to prevent bad events like the moisture, moast of the time given by bad insulations job or insulations job done with no care.
Heater need a supply voltage of 12v DC and drain 5w, it is realized with a thin layer of polyester and the cables in silicon material (cables length 500mm).
DimasTech BackPlate Heater is compatible with all the Vapochill® (all the models)
General Purpose Heater for Phase Change Systems
General Purpose Heater is used to prevent moisture forming in the evaporator hold down of nphase change systems or else at direct contact with the copper evaporator.
This Heater is able to prevent bad events like the moisture, moast of the time given by bad insulations job or insulations job done with no care.
Heater need a supply voltage of 12v DC and drain 11w, it is realized with a thin layer of Kapton and the cables in silicon material (cables length 500mm).
Attention: